Press Stud Tie

Formed galvanised steel connector designed to provide an effective means of fastening top  and bottom wall plates to studs in high wind areas.

This formed galvanised steel connector incorporates preformed teeth making it quick and easy to apply. Eliminates timber splitting as the preformed teeth are positioned away from timber ends and edges. Provides greater tie-down strength as it is driven into the side grain of timber to resist wind uplift in a lateral shear.

Complies with Type B bracing specifications when used to secure studs in braced panels.

APPLICATION: Stud Tie

   
Step 1.                         Step 2.

Step1. Position the shorter leg of the Stud Tie on the external side of the wall plate and hold firmly.

Step2. Hammer the preformed teeth into the stud and then bend the longer leg around the plate. Once a tight bend is achieved, hammer the remaining teeth into the other side of the stud.

APPLICATION: Press/Stud Tie

   
Step 1.                        Step 2.

Step 1. Position the Press/Stud Tie over the wall plate and hold the stud firmly.

Step 2. Hammer the preformed teeth into both sides of the timber wall stud.

More information is contained in the PDF below.

For more information Contact Multinail
 
 

Downloads

• Stud Ties (Australia) (2.15 MB PDF)